Extends life and performance of air tools, lubricators, valves and cylinders. Prevents seizure of air tools and pneumatic equipment. Recommended for tools requiring a 10 weight non-detergent lubricant. Working temperature: 5° F to 350° F.

2050486853 Chicago Pneumatic Ball Bearing

2050497003 Chicago Pneumatic Jacob Chuck Key 1/4". Replaces 8940162271.

2050528023 Chicago Pneumatic Ball Bearing 698zz

8940158455 Chicago Pneumatic Pneu-Lube Synthetic Clutch Grease 100Gm Tube

8940158456 Chicago Pneumatic Pneu-Lube Synthetic Clutch Grease Cartridge

8940158685 Chicago Pneumatic Ball Bearing 6000zz

8940158686 Chicago Pneumatic Ball Bearing 698zz

8940158688 Chicago Pneumatic Air Inlet Bushing

8940158729 Chicago Pneumatic Exhaust Deflector

8940158730 Chicago Pneumatic Motor Housing

8940158732 Chicago Pneumatic Front End Plate

8940158733 Chicago Pneumatic Cage

8940158735 Chicago Pneumatic Internal Gear

8940158736 Chicago Pneumatic Clamp Nut

8940158737 Chicago Pneumatic Rear End Plate

8940158738 Chicago Pneumatic Rotor

8940158739 Chicago Pneumatic Rubber Grip

8940158741 Chicago Pneumatic Blade Set

8940158742 Chicago Pneumatic Filter

8940158743 Chicago Pneumatic Rubber Ring

8940158744 Chicago Pneumatic Dowel Pin

8940158745 Chicago Pneumatic Gear

8940158746 Chicago Pneumatic Washer

8940158747 Chicago Pneumatic Spring Pin (2x10mm)

8940158748 Chicago Pneumatic Trigger

8940158749 Chicago Pneumatic Valve Stem

8940158750 Chicago Pneumatic Valve Bushing

8940158751 Chicago Pneumatic Drill Chuck 6.5mm 3/8" x 24

8940162271 Chicago Pneumatic Jacob Chuck Key 1/4"

8951011473 Chicago Pneumatic Keyed Chuck 6.5mm 3/8" X 24

C098689 Chicago Pneumatic Push-Type Hand Grease Gun For Flush Fittings

CA144793 Chicago Pneumatic Bearing-Ball

CA144797 Chicago Pneumatic Pin-Roll

CA149661 Chicago Pneumatic Oil Protecto Lube 4 Oz.

CP7300C Chicago Pneumatic 1/4" Drill 8941073013. Composite housing with thermoplastic rubber handle grip, wings on right & left sides to guide the forefinger. Large teasing trigger and progressive valve allowing more control to start holes. Low speed gear box. Flat back part for better pushing action while drilling and tapping. Reverse lever on the top for easier access. Handle exhaust allowing the air to flow away from the operator. Supplied with high quality industrial Jacobs® chucks for longer use - keyed, Metal. Excellent for drilling, honing, reaming and hole sawing

KF131709 Chicago Pneumatic O Ring

S039709 Chicago Pneumatic Bearing-Ball