TPI 706 High CO Analyzer -  Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button. The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

TPI 707 Carbon Monoxide (CO) Analyzer  -  Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use. The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up if the date of calibration is one year or older.

TPI 708 Combustion Efficiency Analyzer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740 Combines the 708 Combustion Efficiency Analyzer with the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708A740OIL Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A788 Smoke Test Pump & Filter Paper, A790 Analog Oil Pressure Gauge and the A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C10 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A740 Infrared Printer, 2 GK13M K-Type General Purpose Beaded Tip Probes, 2 A603 Brass Fittings (1/8" NPT x 1/4" Barb) and 2 A605 Brass Fittings (1/4" T-Fittings)  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C5 Combines: 708 Combustion Efficiency Analyzer and 270 Autoranging Digital Clamp with Capacitance  -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C7 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance and A740 Infrared Printer -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C8 Combines: 708 Combustion Efficiency Analyzer, 621 Digital Manometer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708C9 Combines: 708 Combustion Efficiency Analyzer, 270 Autoranging Digital Clamp with Capacitance, 621 Digital Manometer, A740 Infrared Printer, A774 6 Foot Silicone Pressure Tubing, 2 A605 Brass Fittings (1/4" T-Fitting) and 2 A776 Static Tips -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 708OIL Combines: 708 Combustion Efficiency Analyzer with the A788 Smoke Test Pump with Filter Paper -  TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709 Combustion Efficiency Analyzer and Differential Manometer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 709RA740 Combines the 709R Combustion Efficiency Analyzer and Differential Manometer with Rechargeable Ni-Mh Batteries and the A740 Infrared Printer - The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

TPI 770 Ambient CO Monitor / Analyzer -  Measure / monitor ambient CO levels in home and office spaces. Visual and audible alarm indicates unsafe CO levels. The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

TPI 775 Combination Carbon Monoxide / Combustible Gas Detector - The combo CO/Combustible gas detector is the first of its kind to combine both detection technologies into one easy to use hand-held and affordable instrument. Your 775 is guaranteed free from defects in materials and workmanship for 3 Years from the date of purchase. The Carbon Monoxide sensor is only guaranteed for 2 years.

RCM4 Fieldpiece ACM4 / SCM4 CO Sensor

SCM4 Fieldpiece Carbon Monoxide Detector - Fast Enough for Walk Around Tests. The SCM4 Carbon Monoxide (CO) Detector has a very fast reaction time, and measures CO in parts per million (ppm). Its electrochemical sensor is fast enough for walk-around tests. Features and benefits include: Field-replaceable CO sensor; Advanced three-pin sensor measures 0 to 1000 ppm CO; Calibrate / Zero SCM4 to ambient quickly with the ZERO button; Audio and visual alarms w/mute; Bright-blue, backlit dual-display with MAX and real-time measurements displayed; Magnetic hanger for hands-free operation; Auto Power-Off (APO).