Introducing the updated Solar 1002, a 12V 1.5A Underhood Battery Charger/Maintainer from SOLAR. Designed for permanent in-vehicle mounting, it properly services all lead acid battery types and requires no settings or adjustments. Perfect for service vehicles and a variety of fleet applications, simply connect an extension cord to its input lead and the 1002 will do the rest. With underhood mounting and automatic operation, the SOLAR 1002 combines supreme convenience and reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use and fleet batteries in top condition.

Schumacher WM-12 Battery Charger 18" Ring Terminal Quick Disconnect With Dust Cover, Ring terminal and plug set makes easy access to battery for seasonal charging. Left installed on battery, you can simply plug in and walk away. Designed for permanent connection. Great for hard-to-reach motorcycle batteries. WM-12 Schumacher Ring Adapter Set Fits MC-1 SEM-1562A SC-200A SC-300A

PLA53 Solar Pro-Logix Ring 12V Male Cigarette Lighter Plug for PL2135 Charger. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps.

Schumacher Battery Charger 3 Amp Fused Quick Disconnect with dust cover. Ring terminal and plug set makes easy access to battery for seasonal charging. Left installed on battery, you can simply plug in and walk away. Designed for permanent connection. Great for hard-to-reach motorcycle batteries. Works On Most Schumacher Small Chargers.

The INC-800A Schumacher 80/70/20 Amp 6/12 Volt Deep Cycle Battery Charger fully automatic, microprocessor controlled charger with Dual mode charging current. Two distinct charging modes: FAST Charge – 80A, 35 minute setting & FULL Charge – 240 minute operation. Reverse polarity and short circuit protection will ensure this until will not apply current to the output connect until it is properly connected. Patent pending 'thermal runaway' protection stops charging if the charger detects that there is a problem with the battery. Large, easy to read LCD display – countdown timer shows time of charge remaining, charger mode selections and battery voltage at start-up.

9640 Associated  Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status.  For standard automotive, deep-cycle, AGM and GEL Cell Batteries

This automotive charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge) as well as "DEEP DISCHARGE RECOVERY" and best of all it's Made in America.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2310 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2310.

Combining fully automatic operation and the ability to properly charge multiple automotive battery types, the PRO-LOGIX PL2320 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.   Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2320.

The SOLAR PRO-LOGIX PL2140 automatic automotive battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a lead- acid battery installed in a vehicle, Flooded, AGM, Spiral Wound, Marine, Deep Cycle and LiFePO4, it can be charged and charged right with PRO-LOGIX. Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.

4501 CHARGE IT! 0.8 Amp 12 Volt Battery Maintainer - The 4501 from CHARGE IT! delivers accurate, reliable and convenient charging to smaller batteries and maintaining to larger batteries. It provides 0.8 amps of charge via its automatic multi-stage charging sequence. It includes two output options: clamps or ring terminal adapters. Either can be connected using its quick attach harness, allowing the operator to choose the option that best meets their need. Its simple display indicates charging status. Meets efficiency requirements for sale in California and Oregon.

4502 CHARGE IT! 2.5 Amp 6/12 Volt Battery Maintainer - The 4502 from CHARGE IT! delivers accurate, reliable and convenient smart charging to a wide variety of battery types and sizes. Perfect for charging and maintaining the batteries found in cars, trucks, SUVs, vans, personal watercraft, motorsports vehicles, motorcycles and more. It delivers a 2.5 amp charge in 12 Volt mode via its automatic multi-stage charging sequence. Its small clamps are ideal for powersports, watercraft and other applications where access is difficult. Its display indicates charging status. Meets efficiency requirements for sale in California and Oregon.

4506 CHARGE IT! 6/2 Amp 6/12 Volt Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

4512 CHARGE IT! 12/6/2 Amp 12 Volt Smart Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

4520 CHARGE IT! 20/10/2 Amp 12 Volt Smart Automotive Battery Charger - The Only Tool You'll Need for All of Your Battery Management Tasks. With the CHARGE IT!® 4500 Series, everything in your garage can be kept charged up and ready for use. Big or small, summer or winter, no matter what type of lead acid battery it utilizes. With multiple charge rates and the ability to properly charge many battery types, CHARGE IT! is your go-to battery service tool for everything from motorcycles and personal watercraft to cars, trucks, SUVs and more.

Clean Power Supply gives 100 Amps of clean, non-fluctuating power for vehicle computer flash reprogramming. Adjustable voltage output from 13.8 to 14.4V. Digital display shows output voltage. For complex vehicle maintenance and showroom installations. Works with Flooded, Deep Cycle & AGM Batteries. A Must Have for Updating Automotive On Board Computers

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2410.

The new 4-bank Battery Maintenance Station, Model No. PL4020, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

The 7320 Associated 12 Volt To 12 Volt Automatic Battery Charger provides a safe automatic method of charging batteries on the go in vehicles trucks and industrial equipment. The High Power DC Source Charger provides accurate method of charging 12 volt lead acid batteries from a 12 volt (10-15 volt) source. Great for charging wheel chairs, electric scooters, or other batteries in a car, van or bus or utility vehicle as well as a power supply for lift gates on trucks and vans. The 4 stage, micro-processor controlled charger is perfect for charging sealed lead acid, VRLA, flooded and gel batteries with 10 VDC to 15 VDC input at 20 amps 14.4 volt output. Charge 12 volt lead acid batteries. Charge a small 12V battery from a large one, or from an automobile, truck, tractor or utility vehicle.

The ATEC 9002A combines reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use batteries in top condition by automatically powering on when needed. Shuts down when battery is fully charged. LED charging light indicates charging status. Reverse polarity and short circuit protection for added safety. Specifically designed for non-seasonal and cold weather maintenance of automotive batteries. Permanently attachable to battery tray. A durable plastic case prevents damage to charger from oil, water, gasoline and other automobile.

DSR117 Schumacher 10 Amp Automotive Charger with Service Mode 12 Volt. Microprocessor-controlled Multi-stage charging Service Mode – maintains voltage at 13.6V to prevent discharge Start/Stop interface Reverse hook-up protection Charging status LED indicators Hook attachment Schu Eco Energy ─ meets the highest industry standards

PLA61 Solar Pro-Logix 5' Clamp Set For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61. SOLAR Pro-Logix automatic battery maintainers control many variables through each phase of the charging process to ensure an optimal charge every time.

PLA62 Solar Pro-Logix 10' Extension Cable For PL4020. With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA63 Solar Pro-Logix Short Clamp Set For PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

PLA64 Solar Pro-Logix Short Length Ring Terminal Kit for PL4020 (for use with PLA62 10' Extension Cable only). With a convenient quick attach cord on the output side, the SOLAR Pro-Logix maintainer interfaces with several accessories equipped with a quick attach connector, including battery clamps PLA61.

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2520.

PL6100 Solar Pro-Logix 12 Volt 60/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

The new 4-bank Battery Maintenance Station, Model No. PL4050, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

PL6800 Solar Pro-Logix 12 Volt 100/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

The Associated ESS6100 is a 100 A high power Smart charger Power Supply with inverter technology. It allows you to Keep a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

PL2112 Solar Pro-Logix 12V 1 Amp Lithium Battery Charger / Maintainer. Charges Conventional, AGM, Spiral Wound, Deep Cycle, Marine and Lithium (LiFePO4) batteries. PRO-LOGIX battery chargers from SOLAR are designed to provide continuous operation in a wide variety of professional and industrial battery service environments. They combine fully automatic operation utilizing a proprietary multi-phase charging process with the ability to properly charge multiple battery types. Advanced charging logic, robust components, quick set-up and smart display feedback mean effective and efficient charging for your operation.

1.5 Amp 12 Volt Automatic On-Board Automotive Charger, on-board charging and automatic operation, the Solar 1002 combines convenience and reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use batteries in top condition. An accessory cord is provided, when a charge is needed simply attach the supply cord to the inlet tap and the charger does the rest, automatically charging the battery. When the charge is complete simply remove the cord and down the road you go. The unit can be mounted virtually any where, a fender, a supply box or directly on the battery.