The 7320 Associated 12 Volt To 12 Volt Automatic Battery Charger provides a safe automatic method of charging batteries on the go in vehicles trucks and industrial equipment. The High Power DC Source Charger provides accurate method of charging 12 volt lead acid batteries from a 12 volt (10-15 volt) source. Great for charging wheel chairs, electric scooters, or other batteries in a car, van or bus or utility vehicle as well as a power supply for lift gates on trucks and vans. The 4 stage, micro-processor controlled charger is perfect for charging sealed lead acid, VRLA, flooded and gel batteries with 10 VDC to 15 VDC input at 20 amps 14.4 volt output. Charge 12 volt lead acid batteries. Charge a small 12V battery from a large one, or from an automobile, truck, tractor or utility vehicle.

9640 Associated  Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status.  For standard automotive, deep-cycle, AGM and GEL Cell Batteries

Clean Power Supply gives 100 Amps of clean, non-fluctuating power for vehicle computer flash reprogramming. Adjustable voltage output from 13.8 to 14.4V. Digital display shows output voltage. For complex vehicle maintenance and showroom installations. Works with Flooded, Deep Cycle & AGM Batteries. A Must Have for Updating Automotive On Board Computers

DCA-8000P Midtronics Diagnostic Charging System, Conductance Profiling and Dynamic Charge Acceptance, Manual Charge Mode, Jump Start Mode, Reflash Mode, Includes Integrated Printer. Combined with Conductance Profiling™, enables quick and accurate battery
diagnosis, avoiding time wasted charging bad batteries. Mimics the
start event with a large load, then applies a charge for a short period
time. Performs critical diagnostics to verify battery can support
start-stop applications

DSR122 Schumacher 4/15/60/275A Wheeled Battery Charger Power Supply Mode 6/12 Volt. Charges standard, deep cycle, AGM and gel cell battery types. Easy operation with digital display, LED indicators and touch pad controls for voltage, percent of charge, alternator, and user-controlled start/stop interface. 20–60 Amp boost mode ramps up the voltage, sending a quick burst of energy that can quickly bring deeply discharged batteries back to life. Wheeled design with retractable handle provides roll-around convenience. 6V/12V operations with 275 Amp output at 12V and 125 Amp output at 6V.

The ESS6007B Associated Automotive Battery Charger 12V 40Amp/130Amp Boost Intellamatic has Electrical Stability System (ESS™) for re-flashes. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defective. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries (including: Spiral Cell, Orbital™, or Optima™ batteries). Not to mention this charger also has Dead Battery Override Control and it is safe to operate in any weather.

The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

ESS6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The ESS6008 Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

The ESS6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

The Associated ESS6100 is a 100 A high power Smart charger Power Supply with inverter technology. It allows you to Keep a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.

The GR8-1200 Multi-tasking Battery and Electrical Diagnostic Station combines the diagnostic charging expertise of the GR8 with EXP Battery and Electrical System Diagnostics to create a complete, flexible and expandable diagnostic station. The GR8-1200 features the new Multi-tasking Bridge, which allows the user to perform battery and electrical diagnostics on other vehicles while the charger is in use. That means you can now more effectively multi-task in the garage and get more value out of one complete diagnostic station. Simply connect the test clamps to perform a full battery and electrical system analysis. If the battery needs charging, connect the charger clamps and the GR8 takes over. If you have more work to do while the battery is being charged, remove the EXP-1200 controller from the cart and take it to work on the other side of the garage. When the GR8 finishes the job, the Multi-tasking Bridge provides LED and audible alarms so that you can wirelessly send the results from the bridge to the controller to view or print.

The GR8-1200 Multi-tasking Battery and Electrical Diagnostic Station combines the diagnostic charging expertise of the GR8 with EXP Battery and Electrical System Diagnostics to create a complete, flexible and expandable diagnostic station. The GR8-1200 features the new Multi-tasking Bridge, which allows the user to perform battery and electrical diagnostics on other vehicles while the charger is in use. That means you can now more effectively multi-task in the garage and get more value out of one complete diagnostic station. Simply connect the test clamps to perform a full battery and electrical system analysis. If the battery needs charging, connect the charger clamps and the GR8 takes over. If you have more work to do while the battery is being charged, remove the EXP-1200 controller from the cart and take it to work on the other side of the garage. When the GR8 finishes the job, the Multi-tasking Bridge provides LED and audible alarms so that you can wirelessly send the results from the bridge to the controller to view or print.

The IBC6008 Associated 60 Amp 12 Volt Automatic Automotive Battery Charger / Analyzer provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output.

IBC6008MSK Associated Intellamatic® 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port for Standard Automotive, Deep‐cycle, AGM and Gel Cell Batteries Includes 12’ Memory Saver Cable and Terminal Covers. The IBC6008MSK Associated 60/270 Amp 12 Volt Automatic Battery Charger / Analyzer and Start Assist provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima Batteries. The Electrical Stability System (ESS™) technology turns IBC6008MSK into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output Via the OBDII Port on your vehicle.

INC100 Schumacher Power Supply / Automatic Battery Charger 70/100 Amp Output 12 Volt fully automatic microprocessor controlled power supply. For regular automotive, lead-acid, calcium, AGM, start-stop and Gel Cell battery types Maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Digital volts and amps display. Multiple output cable selection. Anderson plug with interchangeable power cords for different regional users. Heavy-duty replaceable clamps. Large handle. Adjustable mounting brackets. Adjustable mounting brackets for easy permanent installation to most shop vehicle lifts. Dual temperature-controlled cooling fans. Durable aluminum case.

The MIL6011 Associated 70/35/200 Amp 12/24 Volt Automatic Automotive Battery Charger / Power Supply provides safe effective charging at 12 Volt and 24 Volt Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle
Batteries, as well as Spiral Cell, Orbital or Optima Batteries. Quick Disconnect DC Leads change from standard clamps cables to extra long NATO plug. The Electrical Stability System (ESS™) technology turns ESS6011 into a stable power supply for extended service procedures or re-flashes while the battery is removed while maintaining a nominal 13.7V DC Output. The Deep Discharge and Recovery with desulfation mode enables the user to recover dead batteries ultimately saving the cost of the unit over several batteries that would have normally gone to waste.

MS6210-12 Associated 15 Amp Memory Saver 12Ft. Cable Cig Adapter. 12 ft –Heavy Duty Straight Cord 15 Amp Continuous / 20 Amp Peak Memory Saver Cable Cigarette Lighter Plug Input / Output with in-line fuse.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output.

PL6100 Solar Pro-Logix 12 Volt 60/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.

PL6800 Solar Pro-Logix 12 Volt 100/40/10 Amp Charger 100 Amp Flashing Power Supply provides stable power for vehicle reflashing applications, with up to 100 amps available on demand. This mode supports OE stable power supply requirements and allows operator control of target system voltage, from 13-14.9 Volts in 0.1V increments. Using a switching power supply and advanced circuitry, the PL6100 keeps voltage ripple to a minimum to deliver clean power that will not disrupt the reprogramming event. It also features fast load responsiveness to minimize voltage drop when system demand spikes.