TPI 1010A CO2 CO Temperature Humidity IAQ Meter With PC Data Logging Software And USB Cable - Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

Electronically measure humidity and temperature, Features data-hold and relative functions. Humidity range 10 to 95% RH, Temperature range -4 to 140°F (-20 to 60°C), Display Resolution, 0.1°F / 0.1°C / 0.1%RH, Wet bulb and dew point temperature readings, Data-hold and relative function, Dual LCD with bar-graph indication, Includes soft carrying case includes batteries.

12" Wall Thermometer -40/120°F/°C w/Humidity Scale: 212 Series Wall Thermometers are 12” / 30.5 cm in diameter and available for a variety of requirements that increases employee awareness while monitoring temperature.

12" Cooler/Freezer Thermometer -10/80°F w/Humidity Scale: The 212-159 Cooler/Freezer thermometer is brightly colored and features a 12"(30.5cm) diameter. It has a HACCP reference color-zoned dial and a large black pointer for ease in viewing. This oversized wall thermometers allow easy monitoring of temperatures in critical food-related locations.

The Mastercool 52230 Pen Type Hygrometer has the following features: Rotating cap to protect the sensor, LCD digital display, temp and humidity in °F or °C, min / max record, data hold and an auto-off function.

The Mastercool Airflow + Psychrometer is a battery operated, micro processor based meter that reads humidity, air temp., dew point, wet bulb, air velocity, air volume and BTU. The sensor is built into the remote fan and is protected by a rotating cap. With auto-off with disabling, fast and accurate reading, tripod mountable, microprocessor circuitry, metric and inch units selection, large backlit LCD display, professional remote vane, all in a handheld size unit. Operates on 4 AAA batteries and has a low battery indicator.

556C1 Digital Air Velocity Meter - The 556 Digital Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings as well as calculating CFM. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

TPI 575C1 Digital Air Velocity Meter - The TPI 575 Vane/Hotwire Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

595C1 TPI Digital Hygro-Thermometer Relative Humidity (Rh) Temperature Carrying Case

TPI 597C1 Digital Hygrometer / Psychrometer - The TPI 597 digital hygrometer / psychrometer is a state of the art, easy to use humidity tester designed to display ambient, dew point, and wet bulb temperature as well as humidity. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

This unique pocket-sized, battery operated, micro processor based meter is designed to quickly measure humidity, dry bulb, dew point and wet bulb. You old timers will appreciate this, No need to whirl the meter or refer to a chart for results. The micro processor based psychrometer provides a digital reading on the LCD display. The sensor parts are protected by a rotatable cap.

The TIF8600 is an easy-to-use hand-held CO2/Temperature monitor. The unit provides stable, highly accurate readings due to our patented dual beam NDIR technology. Equipped with a 0-4V output, the unit is perfect for long-term monitoring/recording. The unit features a large, easy-to-read display with a push-button interface which allows for easy calibration, quick adjustments for altitude correction, and simple toggling between ºC and ºF temperature readings. A new feature of the sensor now includes the ability to calculate and display the cfm/person ventilation rate in a space based on the inside/outside CO2 concentration.

AAV3 Fieldpiece Air Velocity and Temperature Accessory Head - Easy to Use Vane Anemometer. The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units:  Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius).  Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space.  Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes.

The ABM-100 Airflow Balancing Meter is an anemometer that fits in your pocket. It’s our first of a series of tools that connect to smart devices and are specifically designed for the HVAC industry. The ABM-100 easily and instantly converts air speed into air volume for you. Then it records the data to a history log, which can be emailed for professional looking reports.

The ABM-200 Airflow & Environmental Meter has all of the features of  the extremely popular ABM-100 plus it is wireless and also has temperature, humidity, and pressure sensors. These additional sensors give the meter the ability to accurately measure and record: Temperature Differential, Dry Bulb Temperature, Wet Bulb Temperature, Heat Index, Relative Humidity, Dew Point, Barometric Pressure, Air Density, Indoor vs. Outdoor Conditions, Wind Speed/Direction/Gusts. The wireless ABM-200 can be attached to our EXP-64 64” aluminum extension pole (sold separately) to take readings without having to go up a ladder.

ABMHOODX3 CPS Easy Hood - 24" x 24" Expansion Frame & Fabric Assembly

ABMHOODX5 CPS Expansion Pole

• Air velocity measurements in HVAC systems
• Air duct analysis to balance commercial and residential HVAC systems
• Fume hoods
• Floor registers
• Exhaust grills

The JL3KH6 Fieldpiece Job Link Wireless Charge and Air Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link™ probes!

The JL3KR4 Fieldpiece Job Link Wireless Charge Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes and 2 pipe clamps in a quick access padded case. All measurements can be sent up to 1000’ away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link™ probes!

PRH2 Fieldpiece Digital Psychrometer - For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional.  Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.

SDP2 Fieldpiece Dual In-Duct Psychrometer - Do More with One Tool. Easy Temperature Split in Real-Time -- and More. The SDP2 Dual In-Duct Psychrometer is more than just your everyday HVACR psychrometer.  It gives HVACR professionals more insight into HVAC evaporator performance than any other psychrometer, because it takes four evaporator measurements at one time:  supply wet bulb, supply dry bulb, return wet bulb, and return dry bulb.

SRH3 Fieldpiece In-Duct Diagnostic Psychrometer - Easy Target Superheat. In-duct Air Measurements Near the Evaporator. The SRH3 In-duct Psychrometer is a great tool to properly charge fixed restrictor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test.  To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator!

The TS-100 is a small, portable, wireless smart tool that, when paired with a smart phone or tablet running the latest CPS Link app, can measure, record and e mail temperature and humidity conditions taken at residential or commercial job sites. The TS-100 data logger is packed and sold as a single meter. Or, when readings from multiple locations at a jobsite are needed, the TS-100-6PK (6 TS-100 data loggers per clamshell pack) may be a better purchase option. Once deployed, each meter an be individually named to make tracking and analysis easy.