Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service


  Home > Multimeters & Test Instruments >

ACH4 Fieldpiece Head-Current Clamp

ACH4 Fieldpiece 400A Amp Clamp Accessory Head
 
Price $56.30


Product Code: FPIACH4
Qty:

Description Prop65
 
ACH4 Fieldpiece 400A Amp Clamp Accessory Head - Measure AC Amps up to 400A. The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on the meter. The ACH4 works with the Fieldpiece “Stick” meter, EHDL1 Electronic Handle, EH4W Wireless Handle, DL3 Data Logger, the HG2 and HG3 HVAC Guide® System Analyzers, or any other digital multimeter (with mVAC range) connected by Fieldpiece ADLS2 detachable silicone leads or AHDL1 handle adapter.
Product Features
  • Jaw claw helps isolate wires for testing
  • Find run/start amps of motors and compressors
  • Great partner for stick multimeters
  • Connect directly to any Fieldpiece stick meter (shown attached to HS36)
  • Remote the amp clamp for hard to reach areas using our deluxe silicone leads with detachable probe tips (model ADLS2)
  • Angled jaw opens to 1.8 inches and makes singling out a wire fast and easy

Included Items:

  • 400A Amp Clamp Accessory - ACH4
  • Operator’s Manual
ACH4 Specifications
Current Range
 		1AAC to 400AAC rms
Conversion Rate
 		1AAC to 1mVAC
Frequency
 		50Hz to 60Hz
Operating Temperature
 		32°F to 122°F
Accuracy
 		±(1.5% reading + 0.2A), 1 to 20 AAC
±(2.5% reading + 0.3A), 20 to 100 AAC
±(3.5% reading + 0.5A), 100 to 400 AAC
Temperature Coefficient
 		less than 0.1% per °F
Maximum Conductor Diameter
 		1.18 inches (30mm)


Browse for more products in the same category as this item:

Multimeters & Test Instruments
Multimeters & Test Instruments > Digital Clamp-On Meters