0000000244 Schumacher 30 Amp Fuse Holder

Power Cord 115 Volt 3 Prong. Termination Specs 16/3 84", 1/4" Quick Connect (Black), Ring Terminal (Ground), 1/4" Quick Connect (White) with Strain Relief. When Discontinued See 0090026136

0090026136 Schumacher Power Cord 115 Volt 3 Prong. Termination Specs, 1/4" Quick Connect (Black), Ring Terminal (Ground), 1/4" Quick Connect (White) with Strain Relief.

This Knob is for selector switches on SE Series chargers only, there are separate knobs for selector switches and timers. Please check your part numbers carefully.

This Knob is for selector switches with a 3/4 Shaft only, there are separate knobs for timers with a half shaft. Please check your part numbers carefully.

7 Position Rotary Selector Switch

0499000052 Schumacher 3 Position Rocker Switch SPDT On-Off-On 16 amp 1/4 spade terminals.

Heatsink Bridge Rectifier Assembly

246-177-666 Switch 3 Position Rocker SPDT On-Off-On 16 amp 1/4 spade terminals.

249-006-666 Christie 40 AMP Jaw-Type Charging Clip Set. Zink Plated Steel. Teeth mesh on three sides of jaw. Max. Amps: 40. Crimp or screw wire connection. Wire Size: 14 /12 Ga. 3/4" Max Standard Jaw Opening.

312-041-000 Bayonet Type 1/4" x 1-1/4" Fuseholder 30 Amp Cap 1/4" x 1-1/4" Fuseholder. 1-Pole Glass and Ceramic Fuse Holder, AC: 250VAC, DC: 125VDC, 0 to 30A, Series HKP. This vibration-resistant fuse holder is for use with 1/4" x 1-1/4" and 6.3mm x 32mm fuses. It features a bayonet-type knob. The thermoplastic meets UL 94 HB.

Red Positive Lead Set With Rubber Boot & Strain Relief. Steel Clip. 16/3 cable 80" Long.

Black Negative Lead Set With Rubber Boot & Strain Relief. Steel Clip. 16/3 cable 80" Long.

3899002964 Schumacher Lead Set 10 Gauge 85" Red/Black

Ceramic Fuse 30 Amp 250 Volt

Ammeter Horizontal 0-12 AMP features easy snap-in installation, no tools required. Red Green Charge Rate face with 0-100% Battery charge level scale. 0-12 Amp range and 1/4" Spade Terminal Connections for ease of installation.

6094K89 Knob For Battery Charger Selector Switches & Timers. This Knob is for selector switches and timers, designed with 1/4" ID and a set screw for locking onto shaft. Suitable for all 1/4" shaft switches. Replaces Schumacher 0099000045 & 0099000096.