020-0076 Associated Chrome Handle Screws (Each)

Clear Acrylic Lens Replaces Cover For 605204 Meter And Others

The 6006 Associated battery charger is one of the highest performance fleet car battery charger on the market, Charges 6, 12 and 24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers, longer AC cord and DC leads for higher performance. "Safe In Any Weather".

The 6006AGM Associated battery charger is one of the highest performance fleet car battery charger on the market, Charges 6, 12 and 24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers, longer AC cord and DC leads for higher performance. "Safe In Any Weather".

Associated Pointer Knob with spring clip (Press-On). Fits 1/2 round shaft switches and timers only. For 3/4 round shaft applications see 610930.

STOP/GO LITE Assembly will upgrade any battery charger clamp kit or repair an existing damaged light. A great safety feature for any battery charger. Fits Snugly inside a clamp lever and reads red for no-go, green for go, preventing reverse connection in poorly lit or unreadable conditions.

604592 Associated Booster Cables STOP/GO LITE Assembly. This is the replacement light only (does not include resistor See 604579 for complete kit). For repair of an existing damaged light. A great safety feature for any battery charger. Fits Snugly inside a clamp lever and reads red for no-go, green for go, preventing reverse connection in poorly lit or unreadable conditions.

Associated 605204 Ammeter 0-100 Amp Range w/ Boost. Includes Sealing Gasket, Mounting Template and mounting hardware.

Chrome Handle with screws and insulated clamp bar.

Front Leg With Screws

610052 Associated Axle With Nuts. Axle 3/8" O.D. x 15-3/4" Long

610054 Associated Universal Base 6009 (UNIVERSAL BASE 6009 (SEE 610498 Base if transformer has four "L" shaped legs.)

Associated 610180 KNOB

610189 Associated Fan Blade Kit, includes two blades with the same diameter, rotation, pitch and wings but differing shaft diameter for older units.

Universal Fan Motor Installation Kit includes everything needed to install on virtually any unit. Comes complete with a 115v. skeleton frame motor (reversible), equipped with 1/4" spade terminals for electrical connections, a fan blade, a set of 1/4" female spade terminal adapter leads, 1/4" Crimp-on female spades for alternate hook up, 2 sets of pin terminals for molex plug installation and 2 wire nuts.

AC CIRCUIT BREAKER

610517 Associated Clamp Bar 7"

DC Circuit Breaker Kit

Associated 610850 Rectifier Installation Kit. The Highest rated Rectifier on the market, completely assembled, includes mounting hardware and insulators.

610862 Associated Transformer 6006 & BCH7106

Associated Pointer Knob with set screw. Fits 1/2 & 3/4 round shaft switches and timers.

500 Amp Jaw Kit (Repairs One Clamp) Heavy Duty Copper construction for long life and high conductance. Includes insulators and screws with acorn nuts.

610977 Associated Back Panel 19 Black

611011 Associated Top Panel 7 Inch Blue

611031 Associated Left Slope Side Panel 40° Blue

611032 Associated Front Slope Side Panel 40° Blue

611083 Associated 6 Position Rotary Switch With Knob

611084 Associated 7 ft 4 AWG DC Cable Set

611157 Associated Wheel Kit Rubber 6 Inch

611245 Associated 120 Minute Electronic Timer with Knob, for use in units with a 120 minute timer already installed. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals.

*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.

611248 Associated A/C Power Cord 16ga 84" 3 conductor grounded with strain relief bushing.

Front Panel 6006 120 Minute Timer

611254 Associated 120 Minute Electronic Timer with Knob, retrofit for units with a mechanical timer. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals.

*If your unit has an Older 90 Minute mechanical timer, use the 611254 retrofit kit to simplify the install. If your unit has an electric 120 minute timer, use the 611245 which is a direct replacement for those units.

Need side terminal adapters? Model 6200 fits Associated and most other insulated clamps for easier connections. Side terminal adapters clip easily into place inside the clamp rivit and pull out of the way when not in use.

Professional quality heavy duty 500 amp replacement clamps for all booster cables. Replace Associated clamps or other manufacturer's products with these professional quality insulated clamps. Clamps incorporate Associated's innovative "Flexi-Spring" for long cable life at the point it bends most. Possibly the best clamp in the industry.