5018A OTC Clutch & Flywheel Handler

Price $1,662.95

Product Code: OTC5018A

OTC 5018A Truck Clutch and Flywheel Handler – Low Clearance. Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs. Swivel casters provide easy maneuverability. Includes a 2" splined shaft with a 1-1/4" pilot to aid in alignment. 360° swivel head. Minimum height of 15" allows access below side faring. When raised, centerline of clutch will be 38-1/4" off floor. Floor space is 32-3/8" long by 24-1/2" at widest point. Features include open stance for ease of access to the work. Unique linkage design raises the load from horizontal to vertical as the pump is cycled. This eliminates any lifting of the clutch by the operator. Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs. Swivel casters provide easy maneuverability. Includes a 2" splined shaft with a 1-1/4" pilot to aid in alignment.

OTC 5018 Truck Clutch & Flywheel Handler

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Features

Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs
Minimum height of 15" allows access below side faring
Floor space is 32-3/8" long by 24-1/2" at widest point
Swivel casters provide easy maneuverability
Includes a 2" splined shaft with a 1-1/4" pilot to aid in alignment
360º swivel head
Minimum height of 15" allows access below side faring
When raised, center line of clutch will be 38-1/4" off floor
Weight., 125 lbs.

Optional Accessories:
516160 – Flywheel handling attachment for use on 5018 / 5018A only
515686 – Splined Shaft, 1-3/4" OD. with 1-1/4" pilot.
516159 – Splined Shaft, 1-3/4" OD. with 1" pilot. Needed for clutch service on some Navistar 466 series engines
600005 – Splined Shaft, 2" OD, with 1.18" pilot. Holds Eaton Fuller UltraShift Plus Transmissions 14-splines, Includes 600007 adapter
600007 – Adapter for attaching splined shafts to 5018A clutch handler. Allows 5015A adapters to be used on 5018A