 |
 |
 |
|
OTC 4064 Vanguard® Two-Stage, High-Pressure Power Units - Thousands of users have put Vanguard to work in a variety of hydraulic power applications. And the reputation for trouble-free performance this pumping unit has earned is a proven, documented fact, not just a sales claim. Vanguard is a fast-acting, precision-built, two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage, the latter being “supercharged” by the gear pump. Vanguard delivers low volume at high pressure, yet provides high volume at low pressure for fast cylinder piston approach and return. Units feature a 10,000 PSI universal motor, which starts under full load. They are suitable for operation up to 10,000 PSI. Motor is 1-1/8 h.p., 12,000 RPM, (27 amp draw). Rated for intermittent duty. The 4064 Vanguard 2-stage hydraulic pump with 3-position/ 4-way valve and 6 ft. remote motor control (115V). 2 gal. of oil supplied.
 Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
To Fully extend a 10-Ton Ram with a 10-1/8" Stroke:- 5" Travel No Load: 1.5 seconds
- 5" Travel Under Load: 12 seconds
- Total Time: 13.5 seconds
Performance Oil Delivery (cu in / min @):- 100 PSI: 650
- 1,000 PSI: 80
- 5,000 PSI: 70
- 10,000 PSI: 55
Specifications:- For Use with: Double-Acting Rams
- Control Valve: 3-Position, 4-Way
- Reservoir: 2 gallon
- Motor Control: Remote 6 foot cord
- Voltage: 1-1/8 hp, 115 Volt, 50 / 60 Hz Single Phase (For 230 Volt Please Specify)
Measurements: (See diagram in second photo)- Overall Height (A): 18-1/4"
- Overall Width (B): 12-1/2"
- Overall Depth (C): 10-1/2"
- Reservoir Height (D): 7"
- Width of Feet (E): 10"
- Depth of Feet (F): 8"
|
|
|
|
|
|
|