These gaskets fit 1/4" flare and 1/2 ACME standard hose fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become crushed over time resulting in poor flow or restriction due to swelling. These are standard for some other vendors hoses as well.

These gaskets fit 1/4" flare and 1/2 ACME standard fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become smashed over time resulting in poor flow.

Never Lose that fitting cap on your recovery unit or tank again. Premium 1/4 Brass Cap With 3" Capture Chain. Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 25). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

1/4" SAE Cap with strap: Repair item for the 6900 series of vacuum pumps.

1/4 Fl Quick Seal Caps (6 Per Pack)

Ten pack of 1/4'' SAE gasket seal caps

One-hundred pack of 1/4'' SAE gasket seal caps made in the USA.

Five pack of 1/4'' SAE wrench style caps made in the USA. For use with A/C and refrigeration service. The brass to brass positive seal is for permanent installation.

Five pack of 1/4'' SAE plastic o-ring seal caps with plastic retainers made in the USA.

A31992-100 JB Industries 1/4" Plastic O-Ring Seal Cap w/Plastic Retainer Strap 100 Pack. Made in the USA.

Ten pack of 1/4'' SAE gasket seal caps with core removers. Made in the USA.

Five pack of 1/4'' SAE plastic core removers.

10-Pack of 1/4'' SAE Brass Caps.

25-Pack of 1/4'' SAE Brass Caps.

Bulk 100-Pack of 1/4'' SAE Brass Caps.

1/4" SAE Brass Cap With Chain Tether (2 Pack)

1/4" SAE Brass Cap With Chain Tether (100 Count)

AVC4P CPS 1/4" SAE Plastic Cap (6-Pk)

AVC4PB CPS 1/4" SAE Plastic Cap (100-Pk)

1/4" SAE Plastic Cap w/Strap (6 Pack)

1/4" SAE Hose Core Depressor (10-Pk)

(6) 1/4" SAE Hose Gaskets & (6) Core Depressors

(6) 1/2" ACME, 5/16" (1/2"-20 UNF) Gaskets & (6) Core Depressors

Twenty-five pack of 1/4'' flare caps made in the USA using the highest level of brass consisting of 65% copper and 35% which means high-tensile strength while resisting corrosion.

Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-hundred pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

One-thousand pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.

NFT5-4-25 JB Industries 1/4" O-Ring Seal Cap 25 Pack - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

NFT5-4-CJ JB Industries 1/4" O-Ring Seal Cap with Bulk Jar (500 Piece) - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.

P509 1/4" Cap, Hose & Coupler Gasket

P509-10 JB Industries 1/4" Cap Hose & Coupler Gasket 10 Pack

P509-25 1/4" Cap, Hose & Coupler Gasket

P511 JB Industries 1/4" Cap Hose & Coupler Gasket 6 Pack

P511-10 JB Industries 1/4" Cap Hose & Coupler Gasket 10 Pack