15600 Robinair CoolTech 6 CFM 2 Stage Rotary Vane Vacuum Pump

Price $617.30

Product Code: RO15600

Robinair Vacuum Pumps are engineered specifically to meet your A/C maintenance needs and to give you trouble-free operation. Take advantage of our years of experience and know-how developing pumps to help you do your job faster and better.

Designed for use on A/C-R systems using CFCs, HCFCs, and HFCs in conjunction with mineral oil, ester oil, alkylbenzene oil and PAG oil as lubricants. Do not use with ammonia or lithium bromide systems; not for use with flammable refrigerants.

Power	115V AC, 60Hz
Stages	2
Displacement @ 50Hz	N/A
Displacement @ 60Hz	6 cfm
Horsepower	1/5HP
RPM @ 50Hz	N/A
RPM @ 60 Hz	N/A
Ultimate Vacuum	20 Microns
Intake Ports (Male Flare)	1/4", 1/2"
Oil Capacity	13 oz
Dimensions	7.8" x 18.3" x 11.4"
Shipping Weight	30 lb

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Features

Iso-Valve – Isolates the pump from the system with just a quarter-turn
Gas Ballast – Moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation.
Two-stage Design – Cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum
Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining
Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side. The sight glass on the front of the pump shows you when enough oil has been added
Heavy-Duty Motor – High torque design for easy startup and efficient operation
Offset Rotary Vanes – Our proven design builds a powerful compression within the pumping chamber to reduce system pressure and vaporize moisture so it can be exhausted along with air
Molded Base – Durable polycarbonate base improves pump balance and minimizes vibration during operation
Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight but durable

Free Air Displacement:		6 CFM
Number of Stages:		Two
Factory Micron Rating:		20 microns
Intake Fitting:		1/4" MFL and 1/2" MFL Tee
Oil Capacity:		13 oz.
Motor Size:		1/2 HP
Voltage:		115V / 60 Hz
Weight:		30 lbs.