068-013-666 Century 3/8" Axle End Cap, for 3/8" Axles

238-260-666 Century Positive Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

238-261-666 Century Negative Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

246-237-666 Switch Momentary Test Switch (On-Mom)

Mechanically controls charging in timed Mode with manual hold mode. 2 hour. Single Pole Double Throw (SPDT) Switch rated 15 amperes. Termination is designed to accept 1/4" spade terminals.

Switch Three Position Double Pole Triple Throw (On-Off-On) 15 Amp Rating 1/4 Quick Connect Terminals.

SLA90 Circuit Breaker, Open construction, automatic reset, 90 Amp, no terminal Hardware

246-410-666 Thermal Breaker 50 Volt. Automatic motor protector is small, light weight and sensitive to temperature and current and is mounted directly on transformer windings for fast detection of temperature changes.

Horizontal ammeter with a 0-60 amp range and a red high amp zone for boost or start. Easy snap in installation with "Wire-Through" induction pick-up on the back. Lamp sockets (red / green indicators) for battery charge and polarity indicators.

247-134-666 Voltmeter 0-20 Volts Horizontal With Test

248-312-000 Power Cord 16/3 AWG SJTOW 88" 1/4" Spade Terminals, Ring Terminal Ground.

Clamps Positive & Negative. Screw Type Connection for ring terminal cables to anchor wire for solderless connection. Dual Hot Jaws for better power distribution. Includes Phillips anchor screws. Does not include hardware for cables, (ring terminals, solder etc...).

Black Negative Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

Red Positive Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

316-014-000 Fan Blade 6" 4 Blade CW

412-751-666 Chrome Battery Charger Handle. Replaces 442-020-166 and other older Century / Solar Handles

413-043-666 Universal Axle Kit With Hubs (15.3/4" Long 3/8" Diameter)

442-020-166 Century Battery Charger Handle. Flat side black painted finish.

865-682-666 Heatsink Rectifier.  Product as pictured.  Does not include any mounting hardware (512-127-000).

865-804-666 Control Board Assembly, includes board with potentiometer and led indicators mounted. Board and switch cannot be sold separately, if your switch stem is broken, you must buy a complete board assembly.

865-932-666 Voltmeter 0-20 Volt Range Horizontal With Board for volt test

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers.