The Goodall® 61-794 voltage control module addresses the issue of generator damage that may occur if a Start•All® runs out of gas while connected to fully charged batteries. For converting the 11-920 to the new style regulator. These kits upgrade older machines that have no voltage control and those that have 2-wire voltage controls to the new singe 6-wire regulator with Run Out of Gas Protection. *These kits also include new solenoids. Includes Voltage Control, Regulator, Solenoid, Switch, Wiring.

The Goodall® 61-795 voltage control module addresses the issue of generator damage that may occur if a Start•All® runs out of gas while connected to fully charged batteries. For converting the 11-621 to the new style regulator. These kits upgrade older machines that have no voltage control and those that have 2-wire voltage controls to the new singe 6-wire regulator with Run Out of Gas Protection. *These kits also include new solenoids. Includes Voltage Control, Regulator, Solenoid, Switch, Wiring.

690-129 Goodall Cover Latch. Note: Includes latch only; Goodall 70-513 Strike sold separately. Requires drilling for mounting hole location.

Generator Pulley for use on all Start-All generators

70-333 Goodall Brush Arm & Spring (Old Style Generators)

70-374 Goodall Commutator End Plate (Old Style With Bronze Bearing Oiler). This is not to be fitted with newer style ball bearing generators.

70-385 Goodall Armature Dual Ball Bearing

70-390 Goodall Terminal Stud Brush Holder Package (Old Style Grounded Generators) See parts 70-333 brush arm & spring and 70-046 brush.

70-408 Goodall V-Belt Long 4L340R (712 716 718 920, B1600, B1800)

70-600-K GoodAll Regulator / Voltage Control has been discontinued. For a replacement see these upgrade kits.
61-812 Upgrade Voltage Control Kit to New Style, 11-712
61-813 Upgrade Voltage Control Kit to New Style, 11-708KVC
61-786 Upgrade Voltage Control Kit to New Style, 11-922
61-784 Upgrade Voltage Control Kit to New Style, 11-620
61-785 Upgrade Voltage Control Kit to New Style, 11-610

70-628 Goodall V-Belt Short 4L230R (712 716 718 920 Series B1600 B1800)

71-656 Goodall V-Belt AX46 900 Compressor 807-811

71-900 GoodAll Compressor switch, cycling

77-321S GoodAll Resistor Assembly

77-330S Goodall Switch Toggle DPDT 712-920 12V

79-373 Goodall Field Coil For Older Generators. (Same as 79-398)

79-375S Goodall Generator Dual Ball Bearing Case Ground. All generators include a core charge of $105.00, When your Generator arrives there will be a return tag included in the package for your convenience, please return the core to receive your core credit. Once received at the factory, you will get a call from one of our agents for your credit. If you choose to keep your core no credit will be given.

79-375S-CR GoodAll Factory Rebuilt Generator B/B Ground Thru Case. All generators include a core charge of $105.00, When your Generator arrives there will be a return tag included in the package for your convenience, please return the core to receive your core credit. Once received at the factory, you will get a call from one of our agents for your credit. If you choose to keep your core no credit will be given.

79-392 GoodAll Brush Plate Assembly (79-371 Gen.)

Commutator End Plate for Bearing

79-396 GoodAll Brush Lead & Terminal, Carbon (79-371 Gen.)

79-398 Goodall Field Coil For 79-371 Generator

79-399 Goodall Ball Bearing For Generators (79-373, 79-375, 79-406)

79-400S Goodall Spring Set (for 79-371, 373, 375, 406)

79-402 GoodAll Thru-Bolt Pkg., Generator (for 79-371, 373, 375, 406)

79-405 GoodAll Brush Set, Carbon (79-375 generator)

79-411 GoodAll Insulator kit

79-500S Goodall Generator, Case Ground, 500 series. All generators include a core charge of $105.00, please return the core to receive your core credit. Once received at the factory, you will get a call from one of our agents for your credit. If you choose to keep your core no credit will be given.

800-942 Goodall Throttle Cable Assembly 900 Series Units (71-942S)

830-518 Goodall Voltmeter 0-18 Volts D.C. (71-506S)

860-224 Goodall Solenoid (77-181S1). Heavy duty solenoid rated for continuous duty. Do not replace with off brand or non specific units rated for starter duty. Also ideal for remote control of power circuits on battery charging systems, low-voltage DC motor generator sets, golf carts, and in-plant lift trucks.

880-205 Goodall Solenoid Copper Strap

880-408 GoodAll Brush (Each)

890-079 GoodAll Switch Assy 11-602 Switch assembly for the following units with one voltage control module*: 11-601, 11-602, 11-605, 11-607, 11-608, 11-610, 11-611, 11-612, 11-802. *For units with two voltage control modules, see our upgrade kits to bring your unit up to the current technology standards. Replaces 70-483S

890-321 Goodall Resistor Assembly

890-436 Goodall Cable Clamp Assembly 30 Foot Duplex 1/0 Gauge (70-436S)