Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Plasma Cutter Parts > 118-011 YA2120 Snap-On 15 amp plasma cutter (120 v.)

118-011 YA2120 Snap-On 15 amp plasma cutter (120 v.)



118-011 Replacement Parts List
Item No.
 		Part No.
 		Description
1
 238-244-666
 Ground Cable with Clamp

239-010-102
 Clamp Only
2
 238-240-100
 Torch
3
 312-092-666
 Nose
4
 711-160-036
 Faceplate
5
 412-081-666
 Foot
6
 412-284-016
 Wheel Mounting Bracket
7
 413-013-666
 Axle
8
 413-042-666
 Wheel and Hub
9
 880-160-888
 Control Transformer
10
 244-078-666
 Rectifier Kit
11
 246-124-666
 Contactor
12
 410-927-010
 Base
13
 248-211-666
 Power Cord
14
 316-009-666
 Fan Blade
15
 411-072-666
 Fan Mounting Bracket
16
 216-087-166
 Fan Motor
17
 880-103-666
 10-Pin Wire Harness
18
 880-023-666
 9-Pin Wire Harness
19
 880-102-666
 Printed Circuit Board
20
 252-003-666
 Pressure Switch
21
 246-086-666
 Gas Solenoid
22
 253-069-666
 Nylon Adaptor
23
 245-105-666
 2 Ohm, 420 Watt Resistor
24
 880-104-666
 Resistor Assembly
25
 880-107-888
 Transformer
26
 213-034-666
 Capacitor
27
 251-003-666
 Pressure Gauge
28
 254-003-666
 Plasma Regulator
29
 246-214-666
 Run / Setup Switch with Cover
30
 245-109-666
 Indicator Light
31
 246-213-666
 Power Switch with Cover
32
 412-285-116
 Handle
33
 410-585-036
 Cover
Sort By:
131-280-908 Century Torch Standoff Repl. 4416 / 44160 131-280-908 Century Torch Standoff Repl. 4416 / 44160

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.

Discontinued
238-240-999 Plasma Torch Head For 238-240-100 238-240-999 Plasma Torch Head For 238-240-100

238-240-999 TORCH HEAD FOR 238-240-100, 20 Amp, Used on 15-22 Amp models 118-008 (YA2230), 118-009 (82020, PSC20, 3W722), 118-010 (2020), 118-011 (YA2120), 118-012 (2010), 118-013 (5Z135, 82015).

Discontinued See 238-240-100 Torch
238-244-666 Cable, Ground & Clamp Assembly 238-244-666 Cable, Ground & Clamp Assembly

238-244-666 Cable, Ground & Clamp Assembly

Discontinued
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
312-104-000 Plasma Torch Handle Assembly For 238-240-100 312-104-000 Plasma Torch Handle Assembly For 238-240-100

Plasma Torch Handle Assembly, no hardware included. Molded handles only for 238-240-100

Discontinued
334-274-100 Trigger Assembly Replaces 334-281-100 334-274-100 Trigger Assembly Replaces 334-281-100

334-274-100 Trigger Assembly Replaces 334-281-100

Price $34.10
334-277-908 Electrode Plasma 15 20amp 5pkg Repl. 4420 44200 334-277-908 Electrode Plasma 15 20amp Repl. 4420 44200 (5 pack)

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $37.28 (per 5 Pack)
334-277-908L Electrode Plasma Extended 15 20amp 5pkg 334-277-908L Electrode Plasma Extended 15 20amp 5pkg

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $31.15 5 Pack
334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220 334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220

Century / Solar Style Plasma 40 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $29.90 Each
334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210 334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $26.25 5 Pack
334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk 334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $28.40 5 Pack
334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230 334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230

Century / Solar Style Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Price $32.50 Each
512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050 512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050

Century / Solar Package of 2 O-Rings for 20/40, 15, 20 and 50 amp plasma cutters. The rubber O-Ring prevents air leaks which cause erratic cutting and cooling.

Price $3.32 2 Pack
Snap-On YA2230 Plasma Cutter Owners Guide Instruction Manual Snap-On YA2230 Plasma Cutter Owners Guide Instruction Manual

This Operators manual provides specific charger information for your specific model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your battery charger. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.
Model Coverage: YA2230, 118-008

Price $8.00
   
 
118-011 YA2120 Snap-On 15 amp plasma cutter (120 v.)