Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Plasma Cutter Parts > 118-008 YA2230 Snap-On 22 amp plasma cutter

118-008 YA2230 Snap-On 22 amp plasma cutter



118-008 Replacement Parts List
Item No.
 		Part No.
 		Description
1
 238-244-666
 Ground Cable with Clamp

41000
 Clamp Only
2
 238-240-100
 15' Torch Assembly
3
 312-142-666
 Nose
4
 711-170-026
 Faceplate
5
 412-081-666
 Foot
6
 412-284-016
 Wheel Mountng Brackets (2)
7
 413-013-666
 Axle
8
 413-042-666
 Wheel & Hub
9
 880-106-888
 Control Transformer
10
 244-076-666
 Rectifier
11
 246-165-666
 Main Contactor
12
 248-190-666
 Power Cord
13
 316-007-666
 Fan Blade
14
 411-072-666
 Fan Mounting Bracket
15
 216-086-666
 Fan Motor
16
 880-126-666
 Wire Harness (10-Pin)
17
 880-023-666
 Wire Harness (9-Pin)
18
 880-102-666 Circuit Board
19
 252-003-666 Air Pressure Switch
20
 246-086-666 Solenoid
21
 253-069-666 Nylon Adapter
22
 245-105-666
 2 Ohm, 420 Watt Resistor
23
 880-020-888
 Main Transformer
24
 880-021-888
 Reactor Coil
25
 880-027-666
 5 Ohm, 50 Watt Resistor
26
 246-199-666
 Relay
27
 251-003-666
 Pressure Gauge
28
 254-004-666
 Regulator
29
 246-214-000
 Run / Setup Switch
30
 245-078-666
 Indicator Light
31
 246-213-000
 Power Switch
32
 410-925-010
 Base
33
 412-285-116
 Handle
34
 440-151-156
 Cover
35
 44050
 O-Rings (2)
36
 44220
 Swirl Ring
37
 44200
 Electrodes (5)
38
 44210
 Nozzles (5)
39
 44230
 Nozzle Cap
40
 44160
(131-280-906)
 Standoff
41
 40210
 50-R 230 Volt Receptacle
Sort By:
131-280-908 Century Torch Standoff Repl. 4416 / 44160 131-280-908 Century Torch Standoff Repl. 4416 / 44160

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.

Discontinued
216-082-000 Fan Motor With Leads 240 Volt 216-082-000 Fan Motor With Leads 240 Volt

216-082-000 Fan Motor With Leads 240 Volt .20 amps C.W. shaft end. Replaces some older models. 216-086-000, 216-086-010, 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 316-007-300 for Fan blade.

Price $42.95
216-086-666 Fan Motor W/ Leads 240 Volt 216-086-666 Fan Motor W/ Leads 240 Volt

216-086-666 Fan Motor W/ Leads 240 Volt .55 amp C.W. shaft end rotation. Replaces 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 216-082-000 as a possible replacement.

Discontinued
238-240-999 Plasma Torch Head For 238-240-100 238-240-999 Plasma Torch Head For 238-240-100

238-240-999 TORCH HEAD FOR 238-240-100, 20 Amp, Used on 15-22 Amp models 118-008 (YA2230), 118-009 (82020, PSC20, 3W722), 118-010 (2020), 118-011 (YA2120), 118-012 (2010), 118-013 (5Z135, 82015).

Discontinued See 238-240-100 Torch
238-244-666 Cable, Ground & Clamp Assembly 238-244-666 Cable, Ground & Clamp Assembly

238-244-666 Cable, Ground & Clamp Assembly

Discontinued
244-080-666 Century Rectifier Plasma 244-080-666 Century Rectifier Plasma

244-080-666 244-076-666 Century Rectifier Plasma

Price $204.95
245-105-666 Century 2 Ohm 420 Watt Resistor 245-105-666 Century 2 Ohm 420 Watt Resistor

245-105-666 Century 2 Ohm 420 Watt Resistor comes with mounting brackets, insulators and mounting harware.

Price $272.22
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
246-213-666 Century Power Switch 246-213-666 Century Power Switch

246-213-666 Century Power Switch

Price $12.04
246-214-666 Switch 2 Position Rocker 16 Amp SPST 246-214-666 Switch 2 Position Rocker 16 Amp SPST

SPST Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals. Original OEM Part Every Time

Price $20.64
312-104-000 Plasma Torch Handle Assembly For 238-240-100 312-104-000 Plasma Torch Handle Assembly For 238-240-100

Plasma Torch Handle Assembly, no hardware included. Molded handles only for 238-240-100

Discontinued
334-274-100 Trigger Assembly Replaces 334-281-100 334-274-100 Trigger Assembly Replaces 334-281-100

334-274-100 Trigger Assembly Replaces 334-281-100

Price $34.10
334-277-908 Electrode Plasma 15 20amp 5pkg Repl. 4420 44200 334-277-908 Electrode Plasma 15 20amp Repl. 4420 44200 (5 pack)

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $37.28 (per 5 Pack)
334-277-908L Electrode Plasma Extended 15 20amp 5pkg 334-277-908L Electrode Plasma Extended 15 20amp 5pkg

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $31.15 5 Pack
334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220 334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220

Century / Solar Style Plasma 40 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $29.90 Each
334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210 334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $26.25 5 Pack
334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk 334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $28.40 5 Pack
334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230 334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230

Century / Solar Style Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Price $32.50 Each
512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050 512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050

Century / Solar Package of 2 O-Rings for 20/40, 15, 20 and 50 amp plasma cutters. The rubber O-Ring prevents air leaks which cause erratic cutting and cooling.

Price $3.32 2 Pack
880-027-666 Century Resistor 5 Ohm 50 watt Resistor 880-027-666 Century Resistor 5 Ohm 50 watt Resistor

880-027-666 Century Resistor 5 Ohm 50 watt Resistor

Price $39.50
Snap-On YA2230 Plasma Cutter Owners Guide Instruction Manual Snap-On YA2230 Plasma Cutter Owners Guide Instruction Manual

This Operators manual provides specific charger information for your specific model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your battery charger. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.
Model Coverage: YA2230, 118-008

Price $8.00
   
 
118-008 YA2230 Snap-On 22 amp plasma cutter