Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-070 83090 Century 90 amp tote wire-feed welder

117-070 83090 Century 90 amp tote wire-feed welder


ITEM PART No. DESCRIPTION
1 880-185-888 TRANSFORMER ASSEMBLY
2 880-184-888 REACTOR ASSEMBLY W/CIRCUIT BREAKER

246-310-666 CIRCUIT BREAKER ONLY
3 860-905-666 RECTIFIER ASSEMBLY
4 216-087-666 FAN MOTOR
5 316-009-666 FAN BLADE
6 312-076-666 WIRE SPINDLE
7 312-087-666 SPINDLE ADAPTER
8 248-197-666 POWER CORD
9 253-018-666 FITTING
10 246-212-666 SOLENOID
11 253-038-666 FITTING
12 4323 DRIVE ROLLER .024/.030/.035
13 880-089-666 DRIVE TENSIONER ASSEMBLY
14 239-123-666 INLET GUIDE TUBE
15 312-103-666 DRIVE BASE W/NUT
16 216-089-666 DRIVE MOTOR
17 880-012-010 HANDLE WELD ASSEMBLY
18 412-278-010 HOOD HINGE
19 410-568-020 RIGHT SIDE PANEL
20 410-802-110 FRONT PANEL
21 880-094-666 SPEED CONTROL ASSEMBLY
22 246-020-666 TOGGLE SWITCH
23 246-057-666 RATE SWITCH
24 246-041-666 CONTROL KNOB
25 4331 STEEL LINER

4325 TEFLON LINER
26 334-228-000 GAS DIFFUSER
27 4309 0.024 CONTACT TIPS (6)

4310 0.030 CONTACT TIPS (6)
28 4328 NOZZLE, STEEL (TAPERED)

4330 NOZZLE, FLUX DR ALUM. (STRAIGHT)

4329 NOZZLE, SPOT (NOTCHED)
29 860-744-000 GUN WIRING HARNESS
30 238-224-100 COMPLETE GUN ASSEMBLY (8 FT)
31 334-221-000 TRIGGER ASSEMBLY
32 334-219-000 HANDLE CAP
33 334-269-000 CONDUCTOR TUBE INSULATION
34 410-643-010 BASE
35 238-223-666 GROUND CABLE ASSEMBLY

4100 CLAMP ONLY (NOT SHOWN)
36 410-557-020 LEFT SIDE PANEL (NOT SHOWN)
37 410-575-030 HOOD (NOT SHOWN)
38 218-942-666 POLARITY JUMPER (NOT SHOWN)
39 412-280-666 GUN CONNECTOR (NOT SHOWN)
40 2141 WIRE TENSION KIT (NOT SHOWN)
41 4213 HELMET (NOT SHOWN)
42 2139 OPTIONAL WHEEL KIT (NOT SHOWN)



-
Sort By:
117-00 Wire Feed Welder Owners Manual 117-070 Wire Feed Welder Owners Manual

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-070

Price $8.00
131-211-100 Mig Gas Conversion Kit 2111 131-211-100 Mig Gas Conversion Kit 2111

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-211-200 Mig Gas Regulator & Hose Kit 131-211-200 Mig Gas Regulator & Hose Kit

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

Discontinued
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
246-041-666 Universal Selector Knob 246-041-666 Universal Selector Knob

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

Price $7.65
246-057-000 Rotary Selector Switch 246-057-000 Rotary Selector Switch

246-057-000 Rotary Selector Switch

Discontinued See 246-058-666
246-058-666 6 Position Rotary Selector Switch 246-058-666 6 Position Rotary Selector Switch

6 Position Rotary Selector Switch with off. Replaces older 246-057-000, 246-057-100, 246-057-200 and 246-057-666 switches. Installation requires drilling mounting holes. Several different styles of switches were used under the old part number 246-057-XXX. Although slightly different, they are completely interchangeable. The new style switch 246-058-666 has different mounting and the wiring is slightly different. Included is a mounting template for drilling holes in your cabinet and a wiring connection chart for ease of installation. Screws and mounting template included. For knob see 246-041-666.
TO EASE INSTALLATION DO NOT REMOVE THE WIRES FROM YOUR OLD SWITCH UNTIL THE NEW PART ARRIVES

Price $49.95
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
246-212-666 Century Solenoid 24 Volt Air Service 246-212-666 Century Solenoid 24 Volt Air Service

246-212-666 Century Solenoid 24 Volt Air Service

Discontinued See 246-086-666
246-310-666 Century Thermal Breaker 246-310-666 Century Thermal Breaker

246-310-666 Century Thermal Breaker

Price $24.87
246-422-666 5 Position Selector Switch 246-422-666 5 Position Selector Switch

246-422-666 5 Position Selector Switch (ASR267-316) 246-422-000. Due to variations in models, always check your outputs and wiring with a meter before use.

Discontinued
310-122-500 Century Steel Drive Roller .024 .030 .035 4323 310-122-500 Century Steel Drive Roller .024 .030 .035 4323

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
312-076-666 Spindle Arm for Century / Lincoln Welders 312-076-666 Spindle Arm for Century / Lincoln Welders

312-076-666 Spindle Arm for Century / Lincoln Welders. See part # 131-419-000 for spindle tension kit or the 312-110-666 spool adapter to fit a 8" spool of wire to the same spindle.

Discontinued See 9SS31898-1
316-009-000 Fan Blade 6" 4 Blade CW 316-009-000 Fan Blade 6" 4 Blade CW

Fan Blade 6" 4 Blade CW. Same as 130007-001 Christie

Price $12.85
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id (Each)

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $8.00
334-221-000 Trigger, Mig Gun 334-221-000 Trigger, Mig Gun

334-221-000 Trigger, Mig Gun

Price $39.50
334-227-000 Tube, Conductor Large Id 334-227-000 Tube, Conductor Large Id

334-227-000 Tube, Conductor Large Id

Price $61.55
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Discontinued see KP35-50
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Discontinued
   
 
117-070 83090 Century 90 amp tote wire-feed welder