Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-037 3Z914A & C Dayton 160 Amp MIG Welder (Phase-Control)

117-037 3Z914A & C Dayton 160 Amp MIG Welder (Phase-Control)


ITEM PART NO. DESCRIPTION
1 245-145-666 Resistor
2 880-041-888 Drive Transformer
3 213-018-666 Capacitor
4 410-190-666 Buss Bar
5 880-248-666 Rectifier/Fan Bracket Assembly (Includes #10,#11)
6 216-099-666 Fan Motor
7 410-594-666 Base
8 216-062-666 Triac Relay
9 316-010-666 Fan Blade
10 214-004-666 Diode
11 216-053-666 Thermostat
12 410-387-010 Back Panel
13 248-165-666 Power Cord With Strain Relief
14 246-212-666 Gas Solenoid
15 880-113-666 Control Circuit Board Assembly
16 410-674-010 Drive Deck
17 312-066-666 Bolt, Spindle, Spring, Washer, And Tensioner Knob
18 246-363-666 Tensioner Knob, Washer, And Spring
19 312-110-666 Spool Adapter
20 239-123-666 Inlet Guide Tube
21 239-102-666 Terminal Block
22 4347 4323 Drive Roller (.045 Serrated) Drive Roller (.024/.030-.035)
23 880-111-666 Drive Tensioner Assembly
24 880-130-666 Drive Base W/Nut
25 246-326-666 Knob
26 412-465-666 Gun Connector
27 412-464-666 Copper Jumper
28 246-142-666 Circuit Breaker
29 880-035-666 Wiring Harness
30 216-089-666 Drive Motor
31 246-371-666 Power Switch <117-037-905 8. U7-037-903A)

216-042-666 Power Switch For All other 117-037'S
32 880-052-666 Heat/Wire Speed Harness With Potentiometers
33 880-249-888 Transformer
34 860-670-888 Reactor
35 410-806-060 Front Panel For 117-037-903A
36 246-095-666 Knob 1 1/2' Diameter
37 880-114-666 SPDT Stitch Circuit Board
38 246-094-666 Knob 1' Diameter
39 312-046-666 Receptacle
40 238-160-666 Jumper W/ Strain Relief
41 238-009-500 Ground Cable Assembly 10' With Clamp (Not Shown)
42 KH525 Ground Clamp (Not Shown)
43 410-391-010 Right Side Panel <Not Shown)
44 410-392-010 Left Side Panel (Not Shown)
45 410-390-010 Hood (Not Shown)
46 246-103-666 Handle Assembly (Not Shown)
47 238-283-100 Gun Assembly 10' (Not Shown)
48 334-286-666 Gas Regulator (Not Shown)
49 4214 Lift Lens Helmet (Not Shown)
50 880-744-000 Gun Wiring Assembly
51 238-393-000 12' Heavy Duty Gun Assembly (4365)
52 084-019-000 Set Screw #8-32 X 1/8'
53 334-254-000 Handle Case
54 334-252-000 Conductor Tube
55 334-302-000 Handle Cap
56 KP21T-50 Nozzle, Steel (Tapered 4328)

KP21-62FAS Nozzle, Spot (Notched 4329)
57 KH710 .024 Contact Tips

KH711 .030 Contact Tips

KH712 .035 Contact Tips

KP11-45 .045 Contact Tips
58 334-363-000 Gas Diffuser
59 334-255-000 Trigger Assembly
60 KP44-3545-15 .018-045 Steel Liner (4370)

KP42N-3545-15 Teflon Liner (4368)

Sort By:
131-211-100 Mig Gas Conversion Kit 2111 131-211-100 Mig Gas Conversion Kit 2111

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-211-200 Mig Gas Regulator & Hose Kit 131-211-200 Mig Gas Regulator & Hose Kit

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

Discontinued
216-062-666 Triac Relay 75 amp 216-062-666 Triac Relay 75 amp

216-062-666 Triac Relay 75 amp

Price $227.94
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
310-119-500 Century Steel Drive Roller .030 .035 .045 4341 310-119-500 Century Steel Drive Roller .030 .035 .045 4341

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-122-500 Century Steel Drive Roller .024 .030 .035 4323 310-122-500 Century Steel Drive Roller .024 .030 .035 4323

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. 310-154-500 Century Steel Serrated Drive Roller .045 4347

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

Discontinued See 310-119-500
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id (Each)

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $8.00
334-221-000 Trigger, Mig Gun 334-221-000 Trigger, Mig Gun

334-221-000 Trigger, Mig Gun

Price $39.50
334-227-000 Tube, Conductor Large Id 334-227-000 Tube, Conductor Large Id

334-227-000 Tube, Conductor Large Id

Price $61.55
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Discontinued see KP35-50
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Discontinued
   
 
117-037 3Z914A & C Dayton 160 Amp MIG Welder (Phase-Control)